Radeus 8000 ACS Series, Руководство по эксплуатации и техническому обслуживанию, Страница: 73 / 174

T Y P I C A L O P E R A T I O N S
Series 8000™ O&M Manual
71
4.7.3 TLE/Steptrack
Steptracking TLE targets is discussed in section 4.7.3,
“ TLE/Steptrack .” General TLE considerations are found in section
4.6.3 , “ TLE — NORAD two-line element .”
4.7.4 IESS/Steptrack
Steptracking IESS targets is discussed in section 4.7.4,
“ IESS/Steptrack. ” General IESS considerations are in section 4.7.4,
“ IESS/Steptrack .”
4.7.5 Manual jog
The ACU front panel provides user-configurable, manual jog controls:
Figure 4-23
The ACU ’s hardware jog buttons have LEDs that show what the con-
troller is doing. See
Figure 4-24
and section 4.7.6 , “ Track Immedi-
ate, Manual Peaking, and Bias Angles ” to adjust button behaviors.
The Home > Manual button, along with the hardware jog buttons, al-
lows the operator to peak the antenna and, optionally, to save that ad-
justment as
bias angles. This is referred to as manual biasing .
Caution
Only move the
antenna while you are
sure it is safe to do so.
Note
H
ardware jog buttons
are disabled unless
the ACU user selects
Home > Manual.