2.1. All radar alerts on X and K bands are completely muted and only displayed if vehicle’s speed is lower than Left
speed setting (Low Speed Mute). It does NOT mute Ka and Laser alerts.
2.2. Radar detector operates in City mode with reduced radar sensitivity set in City Mode Filter if vehicle’s speed
is between Left speed setting (Low Speed Mute) and Right speed setting (City Mode Speed).
2.3. Maximum detector sensitivity will be achieved above Right speed setting (City Mode Speed). Radar detector
operates with maximum sensitivity (Full sensitivity on all bands) if vehicle’s speed is over Right speed setting.
Auto City Mode setting :
3. City Filter and City Mode Speed settings are always default in Beginner Mode.
4. City Filter and City Mode Speed settings can be changed in Expert Mode only.
=============================================================================
Low Speed Mute
=============================================================================
1. All radar alerts on X and K bands are completely muted and only displayed if vehicle’s speed is lower than Low
Speed Mute Setting. However, it does NOT mute Ka and Laser.
2. Low Speed Mute Setting
1) English : Off , 5, 10, 15, 20, 25, 30, 35, 40, 45, 50, 55 mph(Default : 20 mph)
2) Metric : Off, 10, 20, 30, 40, 50, 60, 70, 80, 90 kmph (Default : 30 kph)
=============================================================================
GPS Error Message
=============================================================================
GPS error message displays if the unit does not receive GPS signals for 30 seconds.
=============================================================================
AutoMute Mode
=============================================================================
AutoMute Mode : Selectable Mute volume 0%, 20%, 40%, 60%, 80% of alert volume
1. Radar(X, K, Ka ) / POI Limit Speed : Current volume level stays for the first 3 seconds after the alarm starts, and
reduces to the current volume according to your volume selection. AutoMute is not applicable to Laser alerts.
2. AutoMute ends 10 seconds after the alarm ends. If the same radar is detected or the same POI Limit Speed alert
begins within 10 seconds, the unit keeps AutoMute On
3.
If a different band signal is detected or a different POI Limit Speed alert begins during AutoMute on, AutoMute
will be off and revert to the current volume level.
