RADEMACHER RolloTron DECT, Инструкция по установке и эксплуатации

Страница: 73 / 80

73
11. Removing the belt in the event of device failure
In the event that the RolloTron DECT device fails and the motor
no longer runs, you can use the disengaging bracket provided in
order to completely remove the belt from the belt winder without
the need for cutting it.
1.
Remove the mains plug from the socket and remove
the RolloTron DECT, see page 71.
Disengaging
bracket
Storage
compartment
WARNING! WARNING!
There is a risk of injury as the roller shutter may slam shut in
an uncontrolled manner.
●
Secure the roller shutter from falling.
●
Hold on to the belt tightly to stop the roller shutter
from slamming shut in an uncontrolled manner.
●
Get a second person to help you unlatch the unit.
2.
Place the disengaging bracket in the drive compartment
and press and hold tightly.
3.
Pull out the belt as far as possible from the RolloTron DECT
and release it from the fastening hook. Then pull out the
belt completely.
4.
Place the disengaging bracket back into the storage com-
partment.