RADEMACHER DuoFern 9433-1, Перевод оригинального руководства по установке и вводу в эксплуатацию

Страница: 25 / 32

25
EN
10.7 Rotating the information on the
display (dIS) (180°)
Factory setting = OFF
It may be beneficial to rotate the information shown on the display
through 180° depending on the installation. The display is rota-
ted only after confirming with the menu button, see page 18.
10.8 Reception interval (EIn)
Factory setting = 15 minutes
Here you can set the frequency of communication between
the DuoFern Radiator Actuator 2 and HomePilot
®
or DuoFern
Room Thermostat 2.
The set value describes the time in minutes that the DuoFern
Radiator Actuator 2 waits before it automatically asks for new
information.
i
If the value is set small, the system quickly checks
for changes on the HomePilot
®
or DuoFern Room
Thermostat 2. However, the battery life is also
reduced.