This section gives a few examples to illustrate the procedure for selection of any
particular taal. Press the keys indicated in each example in the sequence indicated
below : 9.1 Teen taal in raag Jaijaivanti: 0, ALT, 4 (display shows 00.4)
9.2 Jhap taal in raag Hamsadhwani: 2, ALT, 9 (display shows 02.9) 9.3 Chau taal in
raag Kalavati: 8, ALT,2 (display shows 08.2) 9.4 To change the previous selection to
Chau Taal in raag Kausidhani, just press ALT (display shows 08.3) 9.5 Deepchandi in
raag Kafi: 1, 2 (display shows 12.0)
10. HELPFUL HINTS :
10.1 If on pressing the "START' key, the instrument does not operate, switch OFF the
instrument, wait for 10 seconds, switch ON and try again. If it still does not work, check
that the Mains voltage is satisfactory. 10.2 Any reduction or sudden fluctuation in the
Mains voltage or Battery voltage may cause the instrument to stop or behave erratically.
In such a case, proceed as indicated in para 10.1.
10.3 No damage can be done to the instrument by pressing the wrong keys or pressing
the keys in a wrong order, either in the normal more or in the programming mode. The
user may experiment freely to try the various functions available in the instrument.
Failure of components is very remote and unlikely. The instrument is quite rugged and
may be transported freely.
11. METRONOME FACILITY: When the Sunadamala is playing, pressing the ALT/MET
key produces a beat for every matra similar to a metronome. The same key alternates
between ON and OFF with every press. The metronome setting is also
stored in memory every time the STORE operation is performed.
`SUNADAMALA' LEHERA TUNE TABLE
TEEN TAAL (16 matras)
00.0 CHANDRAKAUNS
00.1 ALHAIYA BILAWAL
00.2 PILU 00.3 RAMKALI
00.4 JAIJAIVANTI
00.5 KALAVATI
00.6 BRINDABANI SARANG
00.7 MADHUVANTI
00.8 HAMIR
00.9 EMAN
EK TAAL (12 matras)
01.0 HAMIR
01.1 AHIR BHAIRAV
01.2 TODI
01.3 JAIJAIVANTI
01.4 RAMKALI
01.5 KALAVATI
