To connect the AVATON IoT Smart Device to the Local WiFi Network, we perform
the following steps:
1.
We connect the AVATON to the power plug,
2.
In 1-2 sec the Green Light will turn ON indicating that the power supply is
connected and the AVATON IoT has power
3.
A few seconds later the
Red Light
will start flashing, indicating that the AVATON
IoT is not connected to the WiFi
4.
Press button S4 for 1-2 sec as indicated in the video and the picture below:
5.
A few seconds after you release the S4 button, the Red light will start blinking
faster
