9 of 11
TC-400 Radar Speed Sign Installation Manual MN0016 v21.01
TC-400 Installation Instructions
4. Mount the battery housing on the Go Bracket,
securing it with 2 of the screw knobs (black
handle with red center) provided. A third spare
is included with your housing.
If using banding
clamps, make sure the driver cam is inside
the battery housing.
5. Insert and secure the battery packs into the
battery housing with the Velcro strapping as
shown.
6. Connect the battery pack(s) to the radar speed
sign power cord.
7. Mount the radar speed sign display on the
hinges on the battery housing.
8.
Connect the battery power cord to the back
of the radar speed sign display housing
.
One (1) battery pack should provide
approximately 5-7 days of operation of
the radar speed sign. With two battery packs,
you should get approximately 10-14 days of
operation of the radar speed sign. With colder
temperatures, the operation time will drop
proportionately.
Each battery pack will need 12 hours to fully re-charge.
You may prefer to purchase an additional battery pack to operate the sign while
your 2 other packs are being re-charged.
9. Lock the front of the radar speed sign to the battery housing by pushing in the
lock mechanism until you hear a click and the lock is flush
with the side of the housing.
5
5
4
7
7
8
6
