12 of 16
TC-1000 Radar Speed Sign Installation Manual MN0018 v21.01
Making the Power Connections
Solar Power Connections for the TC-1000S
(Stand alone signs only)
If a radar sign/beacon combo has been purchased, please refer to the Radar Sign/Beacon Installation Manual.
1) Slide power wires through conduit connector on the radar sign bell box. (1)
2) Twist conduit into junction box connector until secure. (2)
3)
DO NOT CONNECT WIRING TO SIGN UNTIL STEP 7
4)
Make conduit as straight as possible
5) Run the conduit inside the sign clamps/brackets
up the pole to the solar panel (a). It is important to
secure the conduit to reduce vandalism opportunity.
6) Bend conduit at 90° angle 2"- 3"
from the junction
box connector (b).
Run conduit
INSIDE the
sign clamp
brackets
1
2
a
b
