Radar Systems Zond Aero 500, Руководство пользователя, Страница: 6 / 13

6
Fig. 6. Data acquisition mode.
5. Enter Setup menu. Once Setup is activated, the screen shows ZOND SYSTEM 12e SETUP
dialog box as on the picture below. Menu options are selected using cursor keys and Enter or
Space. A signal may not be seen in the proper position as on the picture at the first run. To set
correct position of the signal choose the
Pulse delay menu and press “ A
” key on keyboard to
start automatic adjustment. Press the Enter and then Close setup menu after pulse delay
adjustment is finished.
Fig. 7. Setup menu.
Note: Zond Aero 500 GPR has built-in deactivating mechanism, i.e. transmitter is switched
ON only when operator enters the SETUP dialog box or STARTs a data acquisition.
Transmitter switches OFF immediately after operator STOPs the data acquisition or leaves
the SETUP dialog box.
2.3. Data acquisition.