Radar Electronics Preco Electronics PVM500, Руководство по эксплуатации и установке

Страница: 3 / 12

Tel: +386 3 4900 800 http://radar-electronics.com/ 3700243A
Copyright 2017
Page 1
Product Description
The Preco Electronics
®
PVM500 is a light-duty, single camera monitor
design for closed cab use. The PVM500 contains one triggered input,
allowing the monitor to be switched on when it is required, i.e., while in
reverse.
Safeguard Instructions
Please read the following cautions carefully before using this product.
Following these rules prevent users from damages related to the misuse of
the product.
Caution:
o
Electrical shock or damage to the product may occur if
machine power is not turned off during installation.
o
Do not install the monitor closer than 6” (15cm) to a heat
emitting source.
o
Do not clean exterior with solvents as they may damage the
product and could potentially cause a fire.
o
Do not mount the unit where it would be subjected to
extreme vibration or shock.
o
Do not place near a magnet as it may cause undesirable
performance.
o
Do not disassemble unit as it will void the warranty.