rada VR2-CC, Руководство по эксплуатации продукта

Страница: 17 / 24

17
10°
20°
Spray Plate
VR Body
Regulator (Orange - 9 l/min
Grey - 6 l/min)
Use a 12 mm A/F
hexagonal wrench to
remove the housing.
Housing
Use a 3mm A/F hexagonal wrench
to remove the screw.
Fit the 'O' seal on
to the the spray
plate.
Direction of Water Flow
Plastic Washer
Strainer
The position
of the arrow
on the spray
plate indicates
10
o
spray
angle.
The position
of the arrow
on the
spray plate
indicates 20
o
spray angle.
Procedure - Changing Spray Plate Angle
1.
Use the 3 mm A/F Hexagonal Wrench (supplied) with the VR body and remove
the screw at the centre of the spray plate. Remove and rotate spray plate
through 180
o
to give the minimum angle spray of 10
o
.
2. Assemble the spray plate in the reverse order of removal.
Note! Do not overtighten the spray plate retaining screw.
Note! Fit the 'O' seal on to the spray plate.