Version 1.0 - June 2015
7
User manual MV-RAD
6.4 Reaction point
Ensure the reaction arm reacts off the middle of the foot as seen in Figure 5A. Do not react off the heel of
the reaction foot as seen in Figure 5B.
Please contact RAD Torque Systems B.V. or your local RAD authorised distributor for custom reaction
arms.
WARNING:
Always keep your hands and other body parts away from the reaction arm when the torque
wrench is in operation, see Figure 5C.
Figure 5A
Figure 5B
Figure 5C
✔
✘
✘
7.
Safety instructions
RAD tools are developed for tightening and loosening threaded fasteners using very large forces. For
your safety and that of others, warning labels and attention labels are prominently attached to the torque
wrench and its accessories.
NOTE:
Make sure you observe the directions on the warning labels at all times.
RAD tools have been designed with safety in mind however, as with all tools you must observe all general
workshop safety practices, and specifically the following:
1. Before using your new tool, get familiar with all its accessories and how they work
2. Always wear safety goggles when the tool is in operation
3. Make sure the reaction arm is in contact with a solid contact point before you operate the tool
4. Make sure the reaction arm snap ring is securely in place to hold the reaction arm in place.
RAD tools are safe and reliable. Not following precautions and instructions outlined here can result in
injury to you and your fellow workers. RAD Torque Systems B.V. incorporated is not responsible for any
such injury.
