W W W . R A D P O W E R B I K E S . C O M
8
1.
Turn the battery pack off using the switch on the side of the battery.
2.
Remove the rubber cover on the charging socket.
3.
With the battery on or off the bike, place the charger in a flat, secure place, and connect the DC output plug from the
charger (round barrel connector) to the charging port on the side of the battery pack.
4.
Then connect the input plug (110/220 volt plug) to the power outlet, charging should initiate and will be indicated by
the LED charge status light on the charger turning red.
5.
After charging, unplug the charger from the wall outlet first and proceed to remove the charger DC plug from the bike
battery socket.
Always charge your battery in temperatures between 50 and 80 degree Fahrenheit and ensure the battery and charger are
not damaged before initiating charge. If you notice anything unusual while charging please discontinue charging and use
of the bike and contact Rad Power Bikes for help.
When the Battery Is Removed
o
Do not touch the “+” and “-“terminal contacts on the bottom of the battery when the battery is removed from the
bike.
o
Be careful not to drop or damage the battery pack when loose from the bike.
o
Ensure the battery is turned off whenever it is being removed or off the bike.
When Installing the Battery onto the Bike
o
Ensure the battery is turned off before sliding the battery into the frame mount receptacle.
o
Do not force the battery onto the receptacle, slowly align and push battery down into the receptacle.
o
Ensure the key is in the locked position before riding and check that the battery has been properly secured to the bike
before each use by pulling upwards and testing the security of the pack.
