RACOM RipEX2, Руководство пользователя

Страница: 193 / 248

8.7.5.1.1. Degradation detector status
The Antenna disconnected and Antenna connected lines provide information about the calibration
– when it was finished, what is the frequency and RF power for which the calibration is valid.
Detector can be one of the following: {offline; running; not calibrated}
Quality of calibration informs about calibration process result – how reliable the failure detection can
be expected:
• unreliable: low quality, unreliable failure detection
• mediocre: reasonable quality
• distinctive: good quality
8.7.6. System
Reboot button
Performs unit cold restart (power cycle equivalent).
8.8. Syslog
SYSLOG server IP
IP address of the remote Syslog server to which will be send logs with severity higher than severity
set in the Max. severity
SYSTOG server Port
Port used by the Syslog server
Max. severity
List box {Off; 0 Emergency; 1 Alert; 2 Critical; 3 Error}, default= ”Off”
Off - switched off the SYSLOG functionality
Only the events with set severity (and higher) will be send to the Syslog server. Severities for indi-
vidual Events can be set in menu ADVANCED/Device/Events/Events
193 © RACOM s.r.o. – RipEX2 Radio modem & Router
Diagnostics