RACOM RAy11, Руководство пользователя

Страница: 62 / 177

6. Configuration
Controls
The following configuration buttons are used for configuration:
Apply and save parameters. Apply
Set parameters are overwritten with original values. Cancel
Reload the current values of the station / both stations.
Should the configuration be changed from other management session, the message
Info: Configuration changed, please click refresh is displayed at the status bar (see
Refresh
screenshot lower). The Refresh button reloads valid data and refreshes web browser
screen.
Load default values of the parameters on the screen. To use any of these values, you
must use the
Apply button.
Load defaults
Loads values of individual parameters from backup configuration. To use any of these
values, you must use the Apply button. For loading backup configuration see menu
Tools – Maintenance – Backup – Settings – Upload .
Load custom
Use the Start button to start automatic refresh of displayed information. Information
subject to this update are highlighted with a refresh icon.
Start
Use the Stop button to stop automatic refresh of displayed information. Stop
Fig. 6.1: Info Refresh
Help
The microwave link configuration system is equipped with built in Help - see Help section. The Help is
accessible in two forms:
• Configuration parameter context help. The help text is displayed in the pop up window after clicking
the parameter name.
• The whole user interface help. The help text is displayed within the configuration screen after
clicking the
Help menu.
RAy Microwave Link – © RACOM s.r.o. 62
Configuration