RACOM PROFI MR400, Руководство по эксплуатации

Страница: 20 / 34

2) Approximate values dependent on frequency and modem type.
Tab. 4.2: Standards complied
ETSI EN 300 113-2 V1.3.1, FCC part 90, RSS 119 Radio parameters
ETSI EN 301 489-5 V 1.3.1;
ETSI EN 300 113-1 V 1.5.1 EMC (Electromagnetic Compatibility)
CSN EN 60 950:2001 Electrical safety
UN Regulation No.10 (EHK No.10) Wheeled vehicle usage
CSN EN 50 385, CSN EN 50 383 Human exposure electromagnetic fields
Tab. 4.3: Railway Safety Appliance Standards Regulations
CSN EN 50155 ed. 2
nd
: 2002. art. 10.2.8.2
CSN EN 50121 art. 7: tab. 3 and 4
Electronic appliances in railway vehicles
CSN EN 50121-3-2 art. 8 EMC (Electromagnetic Compatibility)
CSN EN 61373 Vibrations and beats
Upon installation in railway vehicles, where there is a high level of interference, special attention should
be given to the communication interface. In such cases it is necessary to use shielded cables and
correctly grounded twisted pairs.
Note
The standard CSN EN 50155 (Electronic equipment in railway vehicles) does not apply to
analog inputs and outputs and to the interface in the 1st slot. Therefore they are not recom-
mended for use, and in an environment specified according to this standard no warranty
applies to their use.
Narrowband modems – PROFI MR400, MR300, MR160 – © RACOM s.r.o. 20
Table of Technical Parameters