Step 4 – Connecting the LAN cable
Connect one M!DGE/MG102 Ethernet port to your computer using a crossover cable if there is no
switch in between.
Step 5 – Connecting the power supply
Connect the smaller end of power supply adapter to the M!DGE/MG102 power socket. Connect the
other end of the power supply adapter to a standard electrical outlet.
4. Configuration
Access to the M!DGE/MG102 Web Manager:
Routers come with the DHCP server enabled.
1.
If not yet enabled, please enable the Dynamic Host Configuration Protocol (DHCP) on your computer
so that it can lease an IP address from the M!DGE/MG102. Wait a moment until your computer
has received the parameters (IP address, subnet mask, default gateway, DNS server).
Alternative:
Instead of using the DHCP, configure a static IP address on your PC (e.g. 192.168.1.2) so that it
is operating in the same subnet as the M!DGE/MG102. The M!DGE/MG102 default IP address is
192.168.1.1, the subnet mask is 255.255.255.0.
2.
Open a web browser such as Internet Explorer or Firefox. In the web browser’s address field, enter
the default IP address of the M!DGE/MG102 (i.e. http://192.168.1.1); the initial screen appears.
3.
Follow the instructions and use the M!DGE/MG102 Web Manager to configure the device.
5. Compliance Information
M!DGE/MG102 Wireless Routers are GSM/UMTS/WLAN routers and therefore intended to connect to
a cellular network. The intended use is to access GSM or UMTS networks for IP data transmission.
The world-wide operation of these routers is generally permitted.
5.1. Declaration of Conformity
Racom declares that under our own responsability the products M!DGE/MG102 Wireless
Routers comply with the relevant standards following the provisions of the Council Dir-
ective 1999/5/EC.
3
© RACOM s.r.o.
Quick Start – M!DGE / MG102 Wireless Router
