RACOM M!DGE2, Руководство пользователя

Страница: 137 / 189

7.7. SYSTEM
7.7.1. System
Settings
Local host name: The local system hostname
Application area: The desired application area which influences the system behaviour
such as registration timeouts when operating in the mobile environment.
Reboot delay: The number of seconds to wait before the reboot is initiated (might be
needed for some system-rebooting events).
Enable TCP timestamps: Enable TCP timestamps for system wide TCP communication. This is
needed for Protection Against Wrapped Sequence numbers (PAWS),
but with these timestamps enabled a remote attacker can guess the
uptime of the system. The uptime is a lower bound for the age of the
main system components like the kernel. If the system has an uptime
of 3 years, it’s unlikely that recent security patches were applied.
Syslog
Storage The storage device on which logfiles shall be stored.
Max. filesize The maximum size of the logfiles (in kB) until they will get rotated.
Redirect address Specifies an IP address to which log messages should be redirected to. A tiny
system log server for Windows is included in TFTP32 which can be provided
if requested.
In general, the unit comes with an internal flash device which can be used to store data or you can use
the external USB disk.
137 © RACOM s.r.o. – M!DGE2 GPRS/UMTS/HSPA+/LTE router
Web Configuration