Page 4
Step 5.
Install Secure Sliding Bar: Install Secure Sliding Bar as shown using (2) 10-32 x
.250” Truss Head Screws. Ensure that tabs are through square holes on both the
Front and Rear Housings.
Note: You may have to go through the inside of the Secure Server Housing if
servers are installed above and below.
Installation Instructions
Step 6.
Install Secure Brackets: Install Secure Brackets using (4) 8-32 .188” Truss Head
Screws as shown on the Rear Housing. Ensure that the Secure Brackets are
pushed as far into the housing as possible before tightening.
Rear Housing
(2) Secure Brackets
(4) 8-32 x .188"
Truss Head Screws
Secure Sliding Bar
(2) 10-32 x .250"
Truss Head Screws
