ASSEMBLY INSTRUCTIONS
STEP 1: SLIP SLEEVES
On the Pole (B), place 1 pair of slip sleeves (C) at the desired level.
Please make sure the arrow faces up and that the word “top” is right
side up. Do this for each Pole (B) and make sure that the heights are
identical for Pole (B)
Slide the pair of Slip Sleeves (C) until you hear a click to confirm the
pair is locked onto the Pole (B).Do not place more than one pair on
each Pole (B) at a time.
*For safety and stability, the lowest SHELF (A) should be lower than
the 3rd notch from the bottom.
**Note: There will be a very small gap in- between the Slip Sleeves
(C) -this is normal.
STEP 2 : INSTALLING BOTTOM SHELF
Place Shelf (A) on its side and slide the Pole (B) through the holes in
the Shelf (A ). Make sure that the shelf (A) corner cylinders are
positioned over the Slip sleeves (C).
Stand the unit upright.
*Note : The level side of the Shelf (A) is the Top side(the logo on the
corner cylinders should be right
-
side up.)
**Use a rubber mallet, if needed, to secure the Shelf (A).
STEP 3: INSTALLING REMAINNING SHELVES
Repeat step 1 & step 2 to install remaining Shelves (A) as desired.
B
C
A
A
B
STEP 4: FEET LEVELERS
The Feet Levelers are already screwed into the Pole (B)
and you can adjust as needed to ensure your Shelving
Rack is level.
STEP 5: FINISH
AND ENJOY YOUR QUALITY
RACKING SOLUTION PRODUCT
B
D
A
A
