1. Fixed position
The ball could be shot at one position (Horizontal: Left, Middle, Right). This position could be set
with the “<” and “>” buttons on the Remote Control. The vertical position could be set short or
deep (by pressing “^” (deep) and “v” (short) buttons) but you can also set the position much higher
(lobs) but this is a bit more difficult:
1. Set the machine on a Fixed Deep position (“F” and then “^”), the display of the RC display a
“.” on the deep location.
2. Press the “High/Low” button, the display of the RC displays the “:”. The machine moves
now from short to deep position and at both locations a ball will be shot. Then the shooting
system (2 wheels) move to the highest (lob) position but don't shoot a ball there. Even
though, you can lock the preferred height when pressing “F” during the movement.
3. After you locked the height, you can move the horizontal position with the “<” and “>”
buttons.
