Rack Solutions 122-2447, Руководство по установке

Страница: 4 / 8

Step 1. Rail Attachment: Attach the Inner Rail to the chassis by aligning the Shoulder
Lugs with the keyholes in the Inner Rail and slide until the retaining clip has
secured the Inner Rail to the server. Repeat for the other side.
2Post Center Installation Instructions
Step 2. Attach Rear Brackets: Attach the Rear Brackets to the Outer Rail Assemblies,
XVLQJLQFOXGHGÀDWKHDGVFUHZVDQGNHSVQXWV(QVXUHWKH\DUHVHWWRWKH
required "Mounting Depth".
Page 4
Step 3. Attach the rails to the rack: Attach the Front and Rear of the rails to the 4Post
rack as shown below using supplied 12-24 Pan Head Screws on each side.
Repeat for the other side. Right side shown, Left side parts are labeled "L".
Tighten the front and rear Pan Head Screws on the right side rail. Leave the front
and rear Pan Head Screws on the left side rail slightly loose.
(6) 12-24 x .500 Pan Head Screws
Front Rear Outer Rail
(Labeled "R")
Inner Rail
(Labeled "R")
Lug
Outer Rail
Rear Bracket
(4) 8-32 Keps Nuts
(4) 8-32 x .312 Flat Head Screws