13
Filling oil tank
- Open the oil tank.
- Fill directly the oil in the tank. Do not overfill.
- Close the oil tank. Wipe any spillage.
Checking the oil level
- Check the oil level when the engine is off and horizontal.
- Remove the plug / dipstick from the oil tank and wipe it off.
- Insert the oil tank plug / dipstick into the tank neck as shown, without screwing it in, and then remove
it to check the oil level.
- If the oil level is near or below the lower limit of the dipstick, remove the dipstick and fill the
recommended oil reservoir up to the upper limit of the dipstick (bottom edge of the dipstick). Do not
overfill.
- Replace the oil tank plug / dipstick.
5. USE
Before starting and using the mower, check for the presence and
operation of safety devices. Also, check the condition of the blade and
its securing bolt. If necessary, replace or repair defective items. Use
only genuine original parts.
- Place the mower in a clear, level area.
- Push the primer bulb (1) several times.
z
Pull back on the operator control lever and hold it against the
handle.
The blade will continue to rotate for a few seconds after the
engine has stopped. Disconnect the spark plug cap if the
lawnmower is to be left unattended.
z
Take the starter rope with your right hand and pull slowly as far
as to have a resistance, and then pull energetically on the starter
rope.
Operation the controls for mowing
Blade is in action as soon as engine started. While the machine is
working maintain the security handle in working position. The engine
will stop as soon as you release the operator control lever.
Release the lever to stop the engine whenever you need to leave the
mower.
Operator control lever
