Racing RACD314TB, Инструкция по эксплуатации

Страница: 5 / 24

5

Emission of exhaust gases

National regulation can restrict the use of the machine.

Never modify a trimmer or cutter in any way.

Improper use of the machine can cause SERIOUS OR FATAL PERSONAL INJURY.

The engine exhaust form this product contains chemicals to cause cancer, birth defects, of other
reproductive harm.
•
Checking regularly that the cutting attachment stops turning when the engine idles.
•
Use recommended cutting attachments and appropriate. Contact your dealer or our service agent to know
which cutting attachment can be used with this tool. There are possible safety consequences from using other
cutting attachments, e.g. metal multi-piece pivoting chains and flail blades.
•
Check each time before and after use, after a fall or other impacts to identify any significant damage.

Do not use the tool in case of damage. Bring it to a qualified service agent for inspection and reparation.
•
Risks and problems may occur during the operation, follow the instructions in this manual to reduce these risks.
•
If the machine or cutting attachment needs to be unlocked, stop using the tool, remove the spark plug. Wear
safety protection to unlock the tool.
•
Do not work prolonged with the tool, take regular breaks during the operation.
•
Always keep a correct posture, do not use the tool in a position that could create accidents.

Secure the machine during transport to prevent loss of fuel, damage or injury. Always put the protection
devices on the blades. Always transport the tool upright.

Put the protection on the blade when storing the tool.
•
Hazards which could be encountered while using the machine (bump a foreign object, blockage of the
cutting attachment, etc.). In order to avoid hazards, inspect thoroughly the working area; remove all
hazardous material and object which may be present.
Kickback and Related Warnings
● Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory.
Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power
tool to be forced in the direction opposite of the accessory’s rotation at the point of the binding.
● For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering
into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel
may either jump toward or away from the operator, depending on direction of the wheel’s movement at the point of
pinching. Abrasive wheels may also break under these conditions.
● Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be
avoided by taking proper precautions as given below.
a) Never place your hand near the rotating accessory. Accessory may kickback over your hand.
b) Do not position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool
in direction opposite to the wheel’s movement at the point of snagging.
c) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners,
sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
Explanation of symbols
Warning symbol
Read instructions manual