background image

 

11. PRODUCT FAILURE                                               

 

WHAT TO DO IF MY MACHINE BREAKS DOWN?

 

 
If you bought your product in a store:

 

Empty the fuel tank. 
Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the 
repairer will refuse the machine. 
 
Go to the store with the complete machine and with the receipt or invoice. 

 

If you bought your product on a website:

 

Empty the fuel tank. 
Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the 
repairer will refuse the machine. 
Create a SWAP-Europe service ticket on the site: https://services.swap-europe.com When making the request 
on SWAP-Europe, you must attach the invoice and the photo of the nameplate (serial number). 
Contact the repair station to make sure it is available before dropping off the machine. 
 
Go  to  the  repair  station  with  the  complete  machine  packed,  accompanied  by  the  purchase  invoice  and  the 
station support sheet downloadable after the service request is completed on the SWAP-Europe site 

For  machines  with  engine  failure  from  manufacturers  BRIGGS  &  STRATTON,  HONDA  and  RATO,  please 
refer to the following instructions. 

Repairs will be done by approved engine manufacturers of these manufacturers, see their site:  

http://www.briggsandstratton.com/eu/fr  
http://www.honda-engines-eu.com/fr/service-network-
page;jsessionid=5EE8456CF39CD572AA2AEEDFD290CDAE 
https://www.rato-europe.com/it/service-network 
 

Please keep your original packaging to allow for after-sales service returns or pack your machine with 
a similar cardboard box of the same dimensions.

 

For  any  question  concerning  our  after-sales  service  you  can  make  a  request  on  our  website 
https://services.swap-europe.com

 

Our hotline remains available at +33 (9) 70 75 30 30.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание RACASBT314T



















Отзывы: