4.2 HANDLE
- Place one lower bar on each side of the machine. Add a screw and a knob to secure the bars.
- Place the upper handle on the bars. Add the knob and the screw. Close the knob and tighten the screw to
fix the handle.
- The position of the upper handle can be changed: untighten a little the screw and open the knob. You will
able to change the position of the upper handle. Then, close the knob and tighten the screw.
- Install the control bar/propulsion bar by adding the extremity in the holes situated on the upper handle.
4.3 DASHBOARD ASSEMBLY
- Lose the upper handle, then overturn the upper handle.
- Put the dashboard under the the upper handle as show on the picture below.
- Fix 4 bolts to assemble the dashboard on the upper handle.
- Unfold the upper handle and close the knob and tighten the screw to fix the handle.
12
