3. ASSEMBLY
1. Assemble straight pipe with swivel to the pipe (13).
2. Assemble flexible pipe (13) to elbow (12) on blower.
3. Assemble clamps (A1 and B) onto both extremities and tighten.
4. Loosen wing nut(C) completely, install stick handle clamp (D).
5.
Align notches (E) in handle clamp; stick handle should be angled away from operator.
6.
Slide the stick handle onto pipe (14).
7.
Position the stick handle for comfortable operation and tighten wing nut(C).
8.
Assemble the pipe (17) to the straight pipe (16), turning straight pipe clockwise to lock in place.
9. Assemble straight pipe (16) to straight pipe (15) tightly.
10. Use a white nylon cable to tie the long cable to clamp A1.
Adjusting backpack and harness and control handle
1. Place blower on your back by slipping arms through the shoulder straps as if you were putting
on a backpack.
2. Once adjustments have been made to the straps for user comfort, remove the blower from your
back and place on level ground in an upright position.
3. Adjust backpack harness and control handle.
4. FUELLING AND LUBRICATION
Fuel
Use a mixture of unleaded gasoline and 2-stroke engine oil for best results.
WARNING:
Do not pour gasoline directly into the machine. This will cause irreversible damage to
the engine and will void the warranty. Do not use a fuel mixture that has been stored for more than
90 days.
08
