21
Change Engine Oil
Drain the used oil while the engine is warm. Warm oil drains quickly and completely.
⚫
Wipe the oil filler area clean, and then remove the oil filler cap/dipstick.
⚫
Place a suitable container next to the mower to catch the used oil, and then tilt the
mower on its right side. The used oil will drain through the filler neck. Allow the oil to
drain completely.
⚫
Please dispose of used motor oil and the containers in a manner that is compatible
with the environment. We suggest you take it in a sealed container to your local
recycling center or service station for reclamation. Do not throw it in the trash, pour it
on the ground, or pour it down a drain.
⚫
Fill with the recommended oil. Do not overfill. Allow a couple of minutes for the oil to
settle in the engine, and then measure the oil level.
Air Cleaner Service
NOTICE
:
Operating the engine without
an air cleaner, or with a damaged air
cleaner, will allow dirt to enter the
engine, causing rapid engine wear.
⚫
Press down on the cover tabs and
remove the cover.
⚫
Remove the filter from the air cleaner
base.
⚫
Inspect the filter and foam element,
and replace it if damaged.
⚫
Clean the filter by tapping it several
times on a hard surface to remove dirt, or blow compressed air through the air filter
from the inside. Never try to brush off dirt; brushing will force dirt into the fibres.
⚫
Wipe dirt from the inside of the air cleaner base and cover, using a moist rag. Be
careful to prevent dirt from entering the air duct that leads to the carburettor.
⚫
Reinstall the filter and cover.
Spark Plug Service
