Racing RAC3000EB-A, Инструкция по эксплуатации

Страница: 20 / 23

20
7.5 Collection bag
Note: Before you remove and empty the collection bag ensure that the tool
has been disconnected from the mains power supply.
To empty the collection bag, remove it from the tool and empty it.
8 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, unplug the tool.
Warning - Danger of moving hazardous parts.
Keep the ventilation slots of the tool clean to prevent overheating of the engine.
Regularly clean the tool housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Others maintenance, inspection and repairs shall be provided by a qualified service agent.
9 STORAGE
Never leave material in the blower-vacuum suction tube or collection bag.
Disassemble the tool: unscrew the tubes, remove them and then remove the wheel support.
Store the tool in its packaging, in a dry place out of reach of children.
10 TROUBLE SHOOTING
Please check below chart for the observed symptoms to solve problems with your machine
Problem Possible Cause Action
The engine does
not start
The machine is not
connected to the mains
Plug the machines to the mains.
Damaged cable Take the machine to the after
sales agent. Never repair the cable
with tape.
The machine is not
completely mounted
Mount the tubes and the catcher.
Damaged switch Take the machine to the after
sales service
The machine does
not blow
The lever of the machine
is on vacuum mode.
Put the lever on the blowing
position.
Ventilator obstructed. Remove the tube and clean the
ventilator.
Tubes obstructed Clean the tubes
The machine does
not vacuum
The lever is on blowing
mode.
Put the lever on the vacuum
position.
Ventilator obstructed. Remove the tube and clean the
ventilator.
Tubes obstructed. Clean the tubes
If the problem cannot be solved, please contact your after sales agent.