15
c.
Release of the chain brake
To use the chain saw again, the chain brake must be released. This must be done
machine off and cooled. Pull the shield until it returns to its original position.
d.
Sharpening of the chain
For best performance, we strongly recommend that you periodically sharpen the
chain. The chain can either be sharpened by a professional or by yourself by
providing you with a sharpening guide (make sure you know how to use it).
The chain must be sharpened when:
-
Wood chips have become powder
-
To make a normal cut, force on the tool
-
The cut is not straight
-
Vibration increases
-
Fuel consumption has increased
e.
Checking the lubrication of the chain
-
Before checking the oil, make sure that the bar and the chain are in place.
-
Once the engine is started, turns it at medium speed and checks that the chain
oil is sprayed and traces off the ground.
-
The oil flow of the chain is adjustable to obtain the proper flow. Insert a
screwdriver on the clutch side.
-
Turn the adjuster to obtain the correct flow rate for the job.
-
The chainsaw must essentially consume the contents of the oil tank between
each full of fuel. Do not forget to fill the oil tank when filling the machine with
fuel.
4.
Work with wire and harness
NOTE: It is necessary to have a complete training before working at high. It is
strongly recommended that only experienced and trained persons carry out work
at high. Know all emergency procedures to be carried out.
These instructions are examples of good practice. Follow and abide by local laws and
regulations as well.
It is also recommended that the operator who is going to work at height be assisted by
another person.
It is compulsory with techniques of climbing and working position. Be equipped with
complete equipment including harnesses, ropes, strops, snap hooks and other equipment
that allows them to maintain and maintain the saw by adopting secure positions.
