RACING COCKPITS RCP Cockpit PRO MK2, Руководство пользователя

Страница: 19 / 43

Step 8: Install and Align Uprights
1. Slide uprights onto the ends of the side rails and into position.
2. Tighten all 12 bolts attaching uprights onto the side rails
.
Align uprights to be just beyond your knees when sitting in your racing seat. If you have
seat sliders, move the seat to the center for this measurement. This is to give a good starting
position. You can fine tune later as needed.
You may need to prop up each side as you slide each upright on. You can put another
piece of loose profile laid flat under the side for this.
Be sure to leave t-nuts loose enough you can slide each side on with minimal pressure to
minimize any scratching (and just make it easier to do).
If any scratching occurs you can
use the included pen to touch it up.
Page 19
RCP Cockpit PRO Manual (v.02/2024.1)