910106 – Web Grinder
Phone: (262) 637-9681
1.2019 Rev 2
Page
15
of
26
Section 3: Tool Operation
Handle Adjustment
The Web Grinder is operated from a T-handle.
On the T-handle there is a trigger that is used to engage the
grinder.
•
When the trigger is drawn to the handle the trigger link
then activates the on/off valve and starts the grinder
wheel spinning.
•
When the trigger is released the grinder wheel will stop
rotating.
The handle height can be adjusted to accommodate the
operator's comfort zone.
Loosen the locking lever on the frame, adjust the handle
height, and tighten the lever to lock handle in place.
Locking Lever
The handle position can also be rotated 90-degrees by
loosening the locking lever and lifting the handle out of the
frame.
1. Turn the handle 90-degrees.
2. Insert the handle back into the frame.
3. Tighten the locking lever to secure handle.
The guide roller has bearings for smooth, effortless
motion when grinding.
Guide Roller
Stone / Wheel Guard
he Web Grinder’s 2-position Guard can house either 1" or 2"
grinding stones / wheels.
A locking spindle holds shaft in position to aid in stone
removal.
2-Position Guard
