background image

HARDWARE INSTALLATION

Remove Old Irrigation Timer

A:  Unplug your old timer (test system before doing so).

B:  Take a picture of your wiring 

setup using your iPhone or 
Android (for reference).

C:  Label the important wires on 

the old timer (important wires 
include the common wire, 
master valve/pump valve, rain 
sensor, and any other non-
zone wires).

D:  Remove the old timer from the wall.

Mount the Iro

A:  Install the Iro Wall Mount to  

the wall using 2 screws  
(screws included).

B:  Reconnect the wires to the Wall 

Mount terminals. Zone wires go 
in the green slots. Common wires 
go in the white slots. Sensor wires 
(rain – if present) go in the yellow 
slots. Master/pump valve wire (if 
present) go in the blue slot.  
NOTE: If you connect wires to the 
yellow or blue slots, they must be 
activated within the app.

Tips for wiring:

-  Common wire (C/COM) color is usually white.
-  Rain Sensor wire (R/SEN) color varies – diagrams 

available in support website.

-  24VAC wires are not needed with the Iro.
-  Enclosure required for hard wiring installations  

and/or outdoor installation.

-  To release wires, push down on wiring terminal 

with small screwdriver.

-  Only install one wire  

per wire slot.

C:  Install the Front Panel to  

the Wall Mount (simply push  
it into place).

Connect Wires

Congratulations on purchasing 

the Iro and joining the Rachio 

community! If at anytime you need 

assistance please feel free to contact 

us through our support channels 

which you can find on the back of 

this manual.

BLINK UP

Download the App

www.rach.io/appstore

Check WiFi at  
Controller Location

Apple or Android device 
required for Blink Up.

WiFi Credentials Needed

Blink Up the Iro

Tap the BLINK UP button on the  
app to “Blink” your WiFi credentials 
over to your device using your 
smartphone screen.

WiFi Status Lights Troubleshooting

Visit www.support.rach.io for additional information.

APP CONFIGURATION

Set Up Zones 

(tutorial on app)

Watering Times 

(pop up after set up zones)

SUPPORT

Included in the app is a ‘Help’  
option, which will link you directly  
to our support website where you 
can keyword search your question(s) 
or contact our support team.

Attach 

Controller

Master/Pump Valve

*16 Zone Model Only

Sensors

2nd Common Wire

Common Wire

9

10

11

12

13

14

15

16

1

2

3

4

5

6

7

8

Zo

ne

1-

8

Zo

ne

s 9

-1

6*

Attach Wall Mount

Отзывы: