The VBOX Sigma GNSS engine can use the following signals:
• GPS L1/L2C
• Glonass L1OF, L2OF
• Galileo E1B/C, E5b
• Beidou B1I, B2I
Therefore it is important that the NTRIP service you use transmits all of these corrections.
The transmission of these correction signals at 1 Hz uses approximately 1 kB per second depending on how many
satellites are visible, so if you are intending to use a SIM card to connect to the NTRIP server, ensure that you have
enough data available.
Registration
So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to
offer technical support, please register your VBOX Sigma.
Register your unit
Standard Inventory
Product Code
Quantity
Description
VBSIGMA-V1
1
VBOX Sigma Unit
RLACS308
1
GNSS Antenna
TTV1AM20MB31
1
USB-A to USB-C Fast Data/Power
Cable
RLCAB010H
1
Hirose 3 W Plug to Cigar Plug
Power Cable, 2 m
8 GB SD Ultima Pro UHS-1
Memory Card
1
RLACS313
ANTMSTUBSMAM
1
Multi Band Antenna
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/01_-
_VBOX_Sigma_Introduction
8