VB2SX User Guide
Page 8 of 28
Settings Menu
UNITS
USB MODE
CAN MODE
LOG OPTIONS
SERIAL RATE
Press the ‘◄’ and ‘►’ buttons to
choose between the following
units:
Km/h
MPH
KNOTS
Press the ‘◄’ and ‘►’ buttons to
choose between the following
USB options:
SERIAL PORT
CARD READER
Press’■’ and then the ‘◄’ and
‘►’ buttons to choose between
the following modes:
VCI MODE*
To connect any external CAN
modules to the input of the
VB2SX
RACELOGIC MODULES MODE
To connect Racelogic CAN
modules to the RLVB2SX5
(input or output)
Press’ the ‘◄’ and ‘►’ buttons to
choose between the logging
options:
LOG CONDITIONS:
To select either Log
Continuously or log When
Moving
LOG RATE:
Select log rate
– either 20,10, 5,
2 or 1Hz
BACK
Return to Settings menu
Press’■’ and then the ‘◄’ and
‘►’ buttons to choose between
the serial data rates:
Choose from either 20,10, 5, 2
or 1Hz
GPS
TIME OFFSET
BACK
Press’ the ‘◄’ and ‘►’ buttons to
choose between the GPS
options:
DYNAMIC MODE
DGPS MODE
KALMAN FILTER
BACK
Press’ the ‘◄’ and ‘►’ buttons to
offset the UTC time in 30 minute
intervals to allow the VBOX to
represent local time. Shown in
the header of the logged file.
Press’■’ to return to the settings
menu
*Note: In VCI Mode, the VB2SX cannot output CAN data or input data from Racelogic modules.
