How to perform a coldstart
There are two ways to perform a coldstart on the Speed Sensor.
• Software
1. Open the VBOX Setup Software.
2. Select the Speed Sensor from the drop-down connection menu and connect to the unit.
3. Press the GPS Coldstart button on the General tab to activate the procedure.
4. The LED's on the Speed Sensor will all turn red, and return to normal function when the coldstart procedure
has been completed.
• Digital Input
1. Connect the Speed Sensor to a PC using the RS232 connector of the RLCAB093 loom.
2. If the Speed Sensor's Digital Input is configured to Lap Pulse mode, you can perform a coldstart by grounding
the input while connecting the Speed Sensor to power.
3. When this is done correctly, the LEDs on the Speed Sensor will all turn red before returning to normal function
when the coldstart procedure has been completed.
https://en.racelogic.support//Product_Info/Sensors/Single_and_Dual_Antenna_Speed_Sensors/VBOX_Speed_Sensor_User_Guide/
02_-_Speed_Sensor_GPS_Antenna
9