Depending on the Logging Strategy you have selected in the
area, the unit will either
log continuously or when it detects movement.
You can manually override the configured logging strategy by tapping on the
when it is
green to start or stop the logging.
The
will show when the unit is logging data to the SD card.
If you have come to a stop, but the
Record Icon
is still on, you must press the
SD Card Icon
to stop
the logging before you remove the SD card.
Sometimes, due to poor satellite visibility, for example in a garage or close to a building, the box may start
recording even if the car is stationary. Always check the
Record Icon
to make sure the box is not recording
before you eject the card.
IMPORTANT
The SD card should not be removed when the Record Icon flashes red as it may cause you to lose
data.
Note: If the SD card is removed while the box is still recording, you may need to repair it on a PC before
you can use it again.
SD Card Format
Performance Box Touch is supplied with an 8 GB SDHC card in a
FAT32
file format, which is the
only
file format it
supports.
If you are looking to purchase a new SD card, we recommend that any card you use has a write speed of above 7
MB/s (4 MB/s is the absolute minimum) and a speed class of 10 (4 is the absolute minimum). We recommend that
you use SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
IMPORTANT
If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a
FAT32 file system before it will work with a Performance Box Touch unit.
4
