Notes:
•
Smoothing only applies to the screen displays, not to the recorded data.
•
Smoothing introduces a slight delay to the displayed value.
V Avg Mode
You can change whether the average speed on the
Average Speed Screen
is calculated as
Continuous
or
Moving
.
•
Continuous:
Average speed will start to calculate as soon as an SD card is inserted and initialised.
•
Moving:
Average speed will start to calculate as soon as the unit detects a speed of more than 0.8 km/h. The
calculations will stop when the speed is less than 0.8 km/h.
Set a Target Speed
You can define a Target Speed that will be displayed underneath the Speed value on the Speed
Screen, VMAX and Average Speed Screen.
You can choose whether to enable or disable an audible alert (continuous beep for 2 seconds) along with a visual alert
(all 4 LEDs flashing green) to notify you when the target value is reached. Alerts will only show once unless the vehicle
has been stationary since the previous alert.
Enabling one, or both, of the alerts will set the target speed and give you access to the sub-menu where you can define
the target speed condition by pressing the corresponding blue button and using the presented keypad.
15
