V Avg Mode
You can change whether the average speed on the
Average Speed Screen
is calculated as Continuous or Moving.
•
Continuous:
Average speed will start to calculate as soon as an SD card is inserted and initialised.
•
Moving:
Average speed will start to calculate as soon as a speed over 0.8 km/h is detected. calculations will stop
when the speed is less than 0.8 km/h.
Set a Target Speed
A Target Speed can be defined which will be displayed underneath the Speed value on the Speed
Screen, VMAX and Average Speed Screen.
You can choose whether to enable or disable an audible alert (continuous beep for 2 seconds) along with a visual alert
(all 4 LEDs will flash green) when the value is reached. Alerts will only show once unless the vehicle has been stationary
since the last alert.
Enabling one, or both of the alerts will set the target speed and also allow you to access the sub-menu where you
can define the target speed condition by pressing the value box and then using the keypad presented.
5
