Screen Overview
More detailed information on the front screen can be
Setup
When you use the NTRIP Modem for the first time, it becomes a Wi-Fi access point. You can then configure the settings
by logging into this access point using your phone or a computer. A webpage is then used to configure the unit to use
the internal GSM modem or an external Wi-Fi hotspot to connect to your chosen correction service. Settings are
retained after a power cycle.
If the unit is configured to use both the internal GSM modem and an external Wi-Fi hotspot, it will attempt to auto
connect to the Wi-Fi hotspot first on power up.
1. Attach the supplied antenna to the SMA connector on the
.
https://en.racelogic.support//Product_Info/Telemetry_Systems/NTRIP_Modem/Quick_Start_Guides/NTRIP_Modem_-
_Quick_Start_Guide
4