03 - MIM Connecting to VBOX Mini
To connect the MIM01 to a VBOXMini, an RLCAB045 cable must only connect to the
DATA2
socket, because this data
connection is an RS232 serial data link that is only present in the DATA2 socket. The SC light under the connector will
indicate when there is serial communications present between the MIM01 and the VBOXMini.
On the VBOX Mini, the
AUX
connector must be used.
After each power up, the Input Module Screen on the VBOX Mini must be accessed in order for the VBOX Mini
to recognise the presence of the MIM01. After this has been done, then any of the VBOX Mini screens can be
used, but this must be done or the MIM01 channels will not be logged.
Configuring the MIM01 when connected to a VBOX Mini
When a MIM01 is connected to a VBOX Mini, the VBOX Mini will automatically log all of the input channels.
Powered by
https://racelogic.support/
01VBOX_Automotive/
04Modules_and_accessories/
Mini_Input_Module/
10
