DAC01 MANUAL
Page | 6
22 May 2014
Channels
In this section, the eleven configurable channels can be set up to convert CAN data to either analogue, level or
frequency. Note some of the channels have a fixed output mode, as listed below.
1.
Channel list – Shows the channel name and states if the output is configured to analogue, level or frequency.
Select a channel here to configure or view its input and output settings.
2.
Baud rate – Set the baud rate which the DAC01 will read CAN data from.
CAN input tab
1.
Load CAN database – here a CAN database file (.DBC .REF or .VCI) can be selected to load a CAN input
parameter into the currently selected channel.
2.
Channel info - This section will show the CAN input details of the selected channel, or allow new details to be
manually entered.
Note that if a REF file is loaded, this section will be mostly blank as REF CAN data is encypted. The only
accessible settings in this case would be scale and offset, see images below.
2
1
2
1
