The is made to use with a 2-way radio. One audio port
is for an earpiece or headset and the other uses the included
extension cord to connect to the headphone jack of the 2-way
radio.
1. Power On
- Press
Red
button for 3 seconds
Off
- Press
Red
button for 5 seconds
2. Set Channel
- Press
Blue
button until display blinks
Press
Red
button to advance 100 channels at a time
Press
Arrow buttons < >
to scroll up/down to channel
Press
Blue
button to lock on channel, blinking stops
3. Set Volume
- Press
Arrow buttons < >
up/down to adjust
audio level
4. Change Default Channel - (Set Channel
See above)
Hold both
Arrow buttons < >
down for 2 seconds
5. Button Lock
To prevent accidental change of channels or audio level
Lock
- Press the
Red
& Right Arrow >
buttons together for 5
sec "LOC" will blink on the display
UnLock
- Press the
Red
& Right Arrow >
buttons together 2
sec
6. Squelch
A static filter. Default in ON. Indicator (SC) shows on
the display. To test earpieces, turn squelch off by pressing
Left Arrow < &
Blue
button at the same time, you should
hear static. After 3 seconds, the static should go
away when the squelch goes back to default ON
Basic Instructions
Advanced instructions can be found on our website
Accessories
www.raceceiver.com
