1600
Channel Number
Signal Indicator
Squelch
On/Off
Indicator
To
Channels
0
Press to
advance
100
channels
at a time.
®
Press to
scroll down.
®
P
ress to scroll up.
Volume
L
e
ve
l
Bars
Frequency
Display
Q)
Press and
hold until
display
is blinking.
0
After locating
desired channel,
press to "lock"
and return to
Normal Mode.
Display will
stop blinking.
BACEceiver
Drivers
come with
3
sizes of replaceable rubber tips for a semi
custom fit. To rep
l
ace the tips
,
remove the o
l
d t
i
ps
,
and slide the replacement tip over the shaft. Do
not force the earpiece into the ear. They should fit snugly and not be uncomfortable.
1.
All
I
hear is static. - Be sure the squelch is on.
2.
The display shows numbers counting to
10
over and over. - Change the battery.
3.
Does not sound as clear as it did yesterday or this morning. - Change the battery.
4.
It sounds a little scratchy or rough. - Back the volume down a notch or two.
1.
Don't try "no name" batteries - Use the good ones. A quality AAA battery should last
20-24
hours.
2.
Take the battery out after a race.
3.
If it rains, try to keep your RACEceiver as dry as possible.
Normal
ON/OFF
Press and hold
5
sec.
Voiurne
Down ,,,,-
On/Off
Control
Squelch is a
static filter.
Squelch
"On" indicator.
®
When squelch is
on, the squelch
indicator light is on.
Programmable
Default Channel
MODE
Press and hold
to put unit in
nnn
"Channel" Change
Lft..fU
1./5 t.{nn···u1
-=
mode.
.UUU•-· l!!F1
Display will start
blinking.
Volume Up
The default and recommended setting is "Squelch On".
To turn Squelch off - Press
2
and
4
at the same time.
To turn Squelch on - Press
3
and
4
at the same time.
Button Lock
To prevent accidental
change of channels
Press the Red button
and the Right White
Arrow button together
To change the default channel
1.
Hold blue button until channel number flashes.
2.
Use the red and white buttons to advance to the desired default channel.
3.
Hold both white arrow buttons down for two seconds then release.