7
RaceAmerica Race Track Starting Light
Figure 1
Power Box Cover on
rear lower right corner
of enclosure
Figure 2
Exposed Power
Box with rear panel
removed.
Figure 3
AC power gland
Figure 4
AC power 1/2in
Figure 5
AC power 3/4in
POWER CONNECTIONS
Power is supplied through the POWER
INPUT box located on the backside bottom left
rear corner. Models are available powered by
either 110VAC/230VAC autoswitching.
Remove the Power Box access panel
located at the lower right corner, rear of the
enclosure to expose the Power Box (Figure 1).
Loosen the four corner screws to expose the
terminal strip connections (Figure 2).
AC power can be connected with an AC
power cord using the watertight compression gland
shown in Figure 3 using a standard 3-conductor
power cord.
L = live or hot side of AC power
N = neutral side of AC power
G = ground lead of AC power
Power can also be conduit connected by installing
a 1/2in (Figure 4) or 3/4 (Figure 5) by removing
the compression gland. The 3/4” conduit fixture
is connected to the matching hole in the cabinet
metal. The compression gland can remain in place
to provide a watertight connection.
