the sides where the parts touch each other (only a little bit of glue is required). Gently
press down on the walls to ensure a snug fit. Ensure that all the walls are plumb and
square before the glue fully sets.
The single roofing section (
F
) can be glued onto the side and rear walls. This
building has a flat roof.
The two door frames (
H 1-2
) that also include a window frame above the doors and
two wooden door shutters can be glued into position. The shutters can be detailed
further by gluing on the four shutter beams (
K 1-4
). Have a look at the photo above
for some guidance. Next the window frames of the two side walls (
J 1-2
) can be
glued into position. Lastly the billboard (
G
) can be glued into place above the front
doors.
FINISHING & BRANDING
We leave the finishing to your imagination and your taste. Do whatever you think will
transform this into a structure that will compliment your race track diorama. We have
included some artwork and would suggest that you protect it with a clear spray.
CONCLUSION
We sincerely hoped you have enjoyed this assembly and finishing. Please remember
to give us some feedback and either send or post some pictures of this product on
your track.
