Pic.1.Raccoon.Recovery Devices.
1.
“On/Off” button:
1.1.
To turn on the Device, press and hold the button for 2-3 seconds until the indicator
light on the Device turns on;
1.2.
To turn off the Device, press and hold the button for 2-3 seconds until the indicator
light on the Device turns out.
2.
Button 1 (this button can be programmed in the Patient dashboard, for Controller only).
3.
Button 2 (this button can be programmed in the Patient dashboard, for Controller only).
4.
Indicator light:
4.1.
“Green” indicates that the Device is more than 60% charged;
4.2.
“Yellow” indicates that the Device is 30-60% charged;
4.3.
Stable “Red” indicates that the Device is less than 30% charged and it is
recommended to charge it, in this case vibro will not work;
4.4.
Flashing “Red” indicates that the Device need charging. In this case, the operation of
the Device will be impossible and it will turn off automatically;
4.5.
Flashing “Blue” indicates that the Device is searching for a connection with the
receiver, when the connection is established, the blue color stops blinking and turns
off;
4.6.
When charging, depending on the battery level, the indicator may blink red, yellow or
green. When charging is complete, the indicator stops flashing and lights up in green.
4.7.
USB port for charging the Device.
5.
Receiver indicator light:
5.1.
Blinks if there is no connection to the Device
5.2.
Steady on if connection to the Device is established.
6.
Wrist and arm straps for proper fixation on hand (x1 for Controller and x3 for Sensors - sizes
S, M, L).
