User Manual 1260-35
Installation Instructions 2-2
Option 01
Installation
Installation of the Option 01 to the 1260-35 is described in the
Installation section of the 1260 Series VXI Switching Cards
Manual.
Module
Installation
Installation of the 1260-35 Switching Module into a VXI mainframe,
including the setting of DIP switches, is described in the
Installation section of the 1260 Series VXI Switching Cards
Manual. Configuration of the PCBA and setting of the DIP switches
SW1-5 and SW1-6 are described in the following sections.
1260-35 ID Byte
Each configuration responds to different sets of values for
<channel number>. The set of values the 1260-35 responds to is
controlled by switch 5 on DIP switch 51 on the PCB. The switch
settings that correspond to the two configurations are as follows:
Configuration
S1 Switch 5
S1 Switch 6
Four-wire
Off
Off
Two-wire
On
Off
Configuration
The 1260-35 Scanner~u1tiplexer is a user configurable switching
module. Ten different configurations are available as follows:
1) Sixteen 1 x 6 two-wire scanner/multiplexers, P/N 404944-206
2) Eight 1 x 6 four-wire scanner/multiplexers, P/N 404944406
3) Eight 1 x 12 two-wire scanner/multiplexers, P/N 404944-212
4) Four 1 x 12 four-wire scanner/multiplexers, P/N 404944-412
5) Four 1 x 24 two-wire scanner/multiplexers, P/N 404944-224
6) Two 1 x 24 four-wire scanner/multiplexers, P/N 404944-424
7) Two 1 x 48 two-wire scanner/multiplexers, P/N 404944-248
8) One 1 x 48 four-wire scanner/multiplexers, P/N 404944448
9) One 1 x 96 two-wire scanner/multiplexers, P/N 404944-296
10)
One 1 x 192 one
-wire scanner/multiplexers, P/N 404944
Unless otherwise specified, the 1260-35 is shipped from the
factory in the 1 x 192 single wire configuration. Table 2-1 gives the
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
