-3-
ASSEMBLY
WARNING
Before carrying out any assembly or disassembly of this unit, ensure it is disconnected from the electrical supply.
Assembling your machine
1. Mounting the cable holder
Press the cable holder (10) on to the machine.
10
2. Mounting of top handle (models with handle)
Place the top handle (18) on the machine. Secure the
handle with screws (13)
.
Note: The
two screws of
front should be
pointed screw.
3. Mounting the quick fit connector
Screw the quick fit connector (5) tight on to the water
supply inlet (3)
.
5
Note:
The inlet filter must always be fitted in the
water inlet pipe to filter out sand, limestone and
other impurities as these will damage the pump
valves.
Caution:
Failure to fit the filter will
invalidate the guarantee.
4. Connecting the high pressure hose
Screw the high pressure hose (4) on to the high
pressure outlet (2).
5. Connecting the high pressure hose to the
trigger gun.
Screw the high pressure hose (4) on to the
trigger gun (9).
