Rac RAC-MV008, Руководство пользователя

Страница: 4 / 4

Car Polisher - Assembly and Operating
Technical Specifications
Voltage 230V~50Hz
Power rating: 75W
Speed: 2500 rpm
Polishing pad: 240 mm dia
Weight: 2.11 Kg
Noise emission: 22.787dB(A) (Pressure)
58.5dB(A)(Power)
2
Vibration does not exceed 16.322m/s
Before you begin, make sure
car is clean and dry. The work
area should be dry also
.
OPERATION
1.
Place terry-cloth polishing bonnet
securely over sponge pad. (see dia 1)
-3-
2. Spread about a tablespoonful of
of polish evenly over the entire surface
of the pad cover (see dia 2). Do not
apply polish directly to car. This first
application should do about 1/3 of an
average size car. For the second and
third applications of polish, repeat as
above. The pad cover will not adsorb
as much when reloading.
3. Always start and stop the polisher
on or against the car surface (see dia3).
4. Hold extension lead over shoulder
and do flat surfaces first ie: bonnet
boot and roof. Cover areas quickly
with broad sweeping strokes in a
criss-cross pattern. Do not press down
on polisher. The machine
＇
s action,
not pressure, does the best job,
(see dia 4).
5. Work next on smaller surfaces
(doors etc.) Always keep the mains
lead over the shoulder or let it hang to
the ground when working on a vertical
surface marking sure it is well clear
of the moving polishing head. For less
accessible surfaces (such as wing
mirrors, door handles) remove the
polishing bonnet and polish these
areas by hand (see dia 5).
6. Finally remove the terry-cloth application
bonnet and fit the synthetic wool
bonnet onto the polisher, (see dia 1).
Use long, sweeping strokes in a crisscross
pattern to bring out the shine. Do not press
hard. Let the polisher do the work
(see dia 6).
polishing
Car Polisher - Operating
Terry-cloth bonnet
puts polish on.
On-off switch
Synthetic wool bonnet
takes polish off.
Sponge Pad
Dia 1
Dia 4
Dia 3
Dia 5
Dia 6
Dia 1
-4-
Dia 2
Handle